background image

Operating Instructions

„

„

PoE++ 

*

4

 eliminates need for camera power 

configurations

• Configurations for camera's power supply are not necessary when 

the unit is connected to a network device that supports the PoE++ 

standard (IEEE 802.3bt compliant)

*

5

 .

 

Software authentication (LLDP) is also supported, but it may be 

necessary to make settings on the network device (IEEE 802.3bt 

compliant)

*

5

.

<NOTE>

• If the AC adaptor and a PoE++ power supply are connected 

simultaneously, the AC adaptor will have priority. If the AC adaptor 

is disconnected while both power supplies are connected, the unit 

will restart automatically, and the image will be interrupted.

• Use a Category 5e cable or higher when using a PoE++ power 

supply. The maximum length of the cable between the power 

supply unit and the unit is 100 meters (328 ft). Using a cable that 

is lower than Category 5e may result in reduced power supply 

capabilities.

*

4

 

Power over Ethernet Plus Plus. Referred to as "PoE++" in this 

manual.

*

5

 

For details on PoE++ power supply devices for which operation 

has been verified, consult your local dealer.

Accessories

Check that the following accessories are present and accounted for.

• After removing the product from its container, dispose of the power cable cap (if supplied) and packing materials in an appropriate manner.

 Mount bracket for installation surface 

(Hanging/Desktop) (1)

Main unit mounting screw (with flat 

washer, spring washer) 

M3×6 mm (1/4 inches) (1)

Drop‑prevention wire (1)

Drop‑prevention wire mounting screw (1) 

(comes attached to the unit)

 Bracket mounting screws 

(bind‑head) 

M4×10 mm (13/32 inches) (4)

Lens cap (1)

(comes attached to the unit)

Pan stopper (1)

(comes attached to the unit)

AC adaptor (1)

 Power cable

for  AW‑UE80WP, AW‑UE80KP (1)

for AW‑UE80WE, AW‑UE80KE (2)

for AW‑UE80WED, AW‑UE80KED (1)

 

For U.K. and Saudi Arabia

 

 

For Continental Europe, etc.

 

 

For India only

 

Optional accessories

„

z

Wireless remote control AW‑RM50AG (Size “AA” dry battery x 2, obtained separately)

„

z

Direct ceiling mount bracket WV‑Q105A

<NOTE>

• For details on optional accessories, refer to the catalog or consult your local dealer.

42

43

Features (continued)

Содержание AW-UE80KP









































































Отзывы: