![background image](http://html1.mh-extra.com/html/panasonic/aw-ue80kp/aw-ue80kp_operating-instructions-manual_3757329014.webp)
Installation Instructions
6.
Connect the rear panel connectors.
Anchor the AC adaptor cable in place using the cable clamp.
<NOTE>
•
Do not connect PoE cable to the RS-422 port.
•
For details on recommended products, refer to the catalog or consult your local dealer.
•
Always disconnect the power supply before connecting or disconnecting cables.
Connecting or disconnecting cables while the power is turned on may result in malfunctions.
LAN cable
AC adaptor cable
HDMI cable
Coaxial cable
z
How to secure the AC
adaptor cable
A
Loosely secure the cable clamp.
Cable clamp
Loosely secure the cable clamp
in the area shown above.
B
Fasten the cable clamp.
Strap part
Take hold of the strap part, slide
the cable clamp until it stops
moving, and then secure it tightly.
z
Make the setting for Desktop/Hanging for reflecting the installed status on this unit.
When performing operations from a wireless remote control
A
Press one of the CAMERA <1> to <4> buttons on the wireless remote control to select the unit.
B
Press and hold the <MENU> button for approximately 2 seconds to display the Top Menu.
C
Press the <
4
> or <
5
> button to select [Pan/Tilt].
D
Select [Install Position] and select [Desktop] or [Hanging] according to the installation conditions.
14
How to install and connect the unit (continued)