Panasonic AW?HE50HE, Руководство по эксплуатации

Страница: 8 / 530

7 (E)
How to turn the power on and off
w w
Turning the power off
When performing the operations
using the wireless remote control
1
Press one of the [CAM1] to [CAM4] buttons on
the wireless remote control to select the unit.
2
Press the [ON/STANDBY] button on the
wireless remote control for 2 seconds.
The unit’s power is turned off.
w p
The unit’s status display lamp now lights up orange.
3
If a multiple number of units are going to be
used, repeat steps
1 and 2 as required.
4
Set all the power switches of the units and
devices connected in the system to OFF.
w p
When operation is transferred to the standby mode:
The current pan‑tilt position is stored in the memory
(as a POWER ON preset), and the panning/tilting
moves so that the camera points in the backward‑
facing direction.
w p
When operation is transferred to the POWER ON
mode: Panning/tilting moves to the position which
was stored in the memory (as a POWER ON
preset) when operation was transferred to the
standby mode.
Notes
When performing the operations using the controller
When the AW‑RP655 or AW‑RP555 is connected:
1
Set the [OPERATE] switch on the controller to
OFF.
The power of all the cameras (including the unit)
connected to the controller is turned off.
w p
The unit’s status display lamp now lights up orange.
2
Set all the power switches of the units and
devices connected in the system to OFF.
w p
When operation is transferred to the standby mode:
The current pan‑tilt position is stored in the memory
(as a POWER ON preset), and the panning/tilting
moves so that the camera points in the backward‑
facing direction.
w p
When operation is transferred to the POWER ON
mode: Panning/tilting moves to the position which
was stored in the memory (as a POWER ON
preset) when operation was transferred to the
standby mode.
Notes
For further details, refer to the Operating Instructions of the
controller.
When the AW‑RP50 is connected:
Refer to the Operating Instructions of the controller.