Panasonic AW?HE50HE, Руководство по эксплуатации

Страница: 43 / 530

42 (E)
ENGLISH
Setting the menu items
w w
Genlock screen
(AW‑HE50S only)
Genlock
Horizontal Phase 0
Subcarrier Phase
Coarse 90°
Fine 0
H Phase.SC Fine Step 1
Return
Horizontal Phase [–206 to +49]
This is used to adjust the horizontal phase during
genlock.
Subcarrier Phase Coarse [0 ° to 315 ° ]
This is used to adjust coarsely the colour phase during
genlock.
This setting is valid for the VBS signal output.
Subcarrier Phase Fine [–127 to +127]
This is used to adjust finely the colour phase during
genlock.
This setting is valid for the VBS signal output.
H Phase. SC Fine Step [1 to 10]
This is used to select the amount by which the horizontal
phase (Horizontal Phase) is to be adjusted and by
which the colour phase (Subcarrier Phase Fine) is to be
adjusted finely.
Return
Use this to return to the previous menu.
w w
Output screen
Output
Format 1080i
Down CONV. Mode Squeeze
HDMI Color YCbCr422
Return
Format [1080i, 720p, 576i]
The video format is changed on this screen.
For details on how to change the format, refer to
“Changing the format” (page 44).
Down CONV. Mode
[Squeeze, SideCut, LetterBox]
The down‑conversion mode is selected here.
Squeeze
When the 4:3 aspect ratio has been
set for the monitor screen, t
he images
are squeezed horizontally and extended
vertically changing the view of the angle.
SideCut
With the vertical height serving as the
reference, the parts which extend beyond
this at the two sides are cropped changing
the view of the angle.
LetterBox
With the horizontal width serving as the
reference, black bands are added at the top
and bottom changing the view of the angle.
w p
When output is selected for the colour bar, the mode is
fixed to Squeeze.
If “SideCut” or “LetterBox” has been selected, the HDMI
output will not appear for a few seconds when the color
bar display is set to ON or OFF.