40 (E)
ENGLISH
Operation (3D mode)
“3D status monitor” Prllx
Histogram of amount of parallax
(Lch and Rch)
Bar used for input signal (Lch and Rch)
compensation
Approx.
–7.5 %
Approx.
–3 %
Approx.
+3 %
0 %
Jutting out direction
Recessed direction
Amount of parallax
Approx.
+7.5 %
Higher
Distrib
ution of
amount of parallax
Lo
wer
Shoot in such a way that the distribution of the amount of parallax between Lch and Rch is brought within about 3 % of the
screen width.
Under the conditions where a stationary subject has been shot, adjust the vertical positions of the cameras (Lch and Rch)
so that the bar used for input signal (Lch and Rch) compensation is made as long as possible.
The amount of parallax may not be displayed correctly for images containing the kinds of subjects listed below.
Subjects with a low luminance
Subjects which change cyclically in the horizontal
direction
Subjects with minimal changes in the horizontal
direction
Subjects whose amount of parallax exceeds 7.5 %
Note
“3D status monitor” Grid
A grid is displayed at intervals of about 3 % along the width of the screen.
Select LRMIXa or LRMIXb as the 3D output format, and shoot so that the amount of parallax between Lch and Rch come
within the grid width.
Refer to “Setting the output signals”.
