Item
Setting value
Setting details
PERIOD
0 to 5
[PERIOD] and [CYCLE] will be the time from which [CALL] was released
for [CAMERA CCU].
PERIOD: Flashing duration (sec).
CYCLE: Flashing cycle (For 1.0: 500 msec off → 500 msec lit
(repeatedly)).
CYCLE
0.3
0.5
1.0
STD POSITION M.GAIN
-6 to 0 to +36
Sets the standard position of the master gain (M.GAIN).
STD POSITION VAR
-2.9 to 0.0 to +2.9
Sets the standard position for master gain (M.GAIN) step values.
STD POSITION ND
1 to 2 to 5
Sets the standard position of the ND filter.
STD POSITION CC
A to E
Sets the standard position of the CC filter.
IRIS PRIORITY
NON
Serial
LAN
Sets whether to prioritize iris control.
NON
Does not prioritize iris control.
If the camera's iris position does not match the ROP's [IRIS] lever pos-
ition, match the ROP's [IRIS] lever position to the camera's iris position.
Serial
If the camera's iris position does not match the ROP's [IRIS] lever pos-
ition, the ROP's [IRIS] lever position during serial connection will be the
basis of operation.
LAN
If the camera's iris position does not match the ROP's [IRIS] lever pos-
ition, the ROP's [IRIS] lever position during IP connection will be the
basis of operation.
When multiple ROPs are IP connected to a single camera and the
[IRIS PRIORITY] setting for each ROP is set to “LAN”, be aware
that iris controls from all of the ROPs will be performed directly.
ROP DATA SAVE
NO?
YES?
Save the unit's setting information.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP
SETTING]
After starting this process, do not turn off the unit or remove SD cards
until the process is complete.
ROP DATA LOAD
NO?
YES?
Load the unit's setting information.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP
SETTING]
After starting this process, do not turn off the unit or remove SD cards
until the process is complete.
SD CARD FORMAT
NO?
YES?
Format the SD card.
INITIAL with NW
NO?
YES?
Return the unit's settings to the factory default values.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP
SETTING]
INITIAL
NO?
YES?
Return the unit's settings to the default values.
This applies to the following menus.
[ROP SETTING]
UPGRADE
NO?
YES?
Updates the software of the unit.
After starting this process, do not turn off the unit or remove SD cards
until the process is complete.
IRIS CALIBRATION TOP
-
IRIS CALIBRATION adjusts the operating range of the IRIS lever.
[IRIS CALIBRATION TOP] is executed when the IRIS lever is moved to
the OPEN end, and [IRIS CALIBRATION BOTTOM] is executed when it is
moved to the CLOSE end.
IRIS CALIBRATION BOTTOM
SYSTEM VERSION
(Version display)
Displays the system version.
SOFT VERSION
(Version display)
Displays the software version.
FPGA VERSION
(Version display)
Displays the FPGA version.
- 113 -
ROP menu
