Setup Menu: Menu List
89
Setup Menu
EXT TC SEL
Sets the time code to use when an external time code is used.
EXT LTC:
LTC of TIME CODE IN connector.
SLTC:
LTC information added to the serial signal input to the SDI IN connector.
SVITC
: VITC information added to the serial signal input to the SDI IN connector.
Note:
When “SLTC” or “SVITC” is set and “SD SDI” is selected as the input signal, the VITC of
the input video signal is used.
DF MODE
Sets the drop frame mode or non-drop frame mode for CTL and TCG.
DF:
Uses drop frame mode.
NDF:
Uses non-drop frame mode.
VITC BLANK
Selects whether to output VITC signals at the positions specified in the “VITC POS-1” and
“VITC POS-2” menu items during playback.
BLANK:
Does not output a VITC signal.
THROUGH:
Outputs VITC signals.
Note:
• This setting is enabled only during VIDEO and SD SDI output.
• In EE mode, the VITC signal superimposed on the input signal is output as is.
VITC POS-1
Sets the position to insert the VITC signal.
• When set to 59.94 Hz:
LINE 10
to
LINE 16
to
LINE 20
• When set to 50 Hz:
LINE 7
to
LINE 11
to
LINE 22
Note:
• The same line as the “VITC POS-2” menu item cannot be selected.
• This setting is enabled only during VIDEO and SD SDI output.
• Pressing the [RESET] button will not restore the factory defaults.
VITC POS-2
Sets the position to insert the VITC signal.
• When set to 59.94 Hz:
LINE 10
to
LINE 18
to
LINE 20
• When set to 50 Hz:
LINE 7
to
LINE 13
to
LINE 22
Note:
• The same line as the “VITC POS-1” menu item cannot be selected.
• This setting is enabled only during VIDEO and SD SDI output.
• Pressing the [RESET] button will not restore the factory defaults.
HD EMBD LTC
Selects whether to superimpose the LTC information on HD SDI output.
ON:
Superimposes LTC.
OFF:
Does not superimpose LTC.
HD EMBD VITC
Selects whether to superimpose the VITC information on HD SDI output.
ON:
Superimposes VITC.
OFF:
Does not superimpose VITC.
TC OUTPUT REF
Switches the phase of time code output from the TIME CODE OUT connector relative to ex-
ternal LTC input when “TCG MODE” is set to “EXT”. (Only in EE mode)
TC IN:
Synchronized with the external time code input.
VIDEO OUT:
Synchronized with the output video signal.
Item
Settings and brief function description
FREQ indications
59.94Hz
50Hz
59.94Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
