70
AVCHD Playback Mode: Using an Optional AVCHD Board
Set this to resume playback from where it was last interrupted.
1
Press the [MENU] button.
2
Select “PLAY SETUP” and press the [SET] button.
3
Select “RESUME PLAY” and press the [SET] button.
4
Select “ON” and press the [SET] button.
5
Press the [MENU] button to return to the thumbnail
screen.
6
Select and play a clip.
When playback is interrupted, the resume play indicator
appears on the clip thumbnail and playback continues
from this point the next time playback is started.
To turn off resume playback, select “OFF” in step 4.
Note:
Changing this setting does not change the resume playback
setting for a P2 card.
Select the operation for when the skip operation (cue up) is
performed during various playback operations and when
paused.
1
Press the [MENU] button.
2
Select “PLAY SETUP” and press the [SET] button.
3
Select “SKIP MODE” and press the [SET] button.
4
Select the skip mode and press the [SET] button.
5
Press the [MENU] button to return to the thumbnail
screen.
Note:
An index is added to a certain video point of a clip being re-
corded or played back. You can select indexes for display/
playback only if they have been added. Note, however, that
an index cannot be added nor removed by this unit.
Clip playback can be performed only from thumbnails.
1
Use the cursor buttons to move the cursor to the clip
you want to play.
2
Press the [PLAY]
button.
The clip at the cursor position plays.
Press the [SEARCH] button when the thumbnails are dis-
played to pause playback at the beginning of the clip at
the cursor position. Note, however, that stopping playback
during resume playback will pause playback at the re-
sume position.
Press the [STOP]
button to stop playback and return
to the thumbnail.
Use the multi control dial during playback or when paused to
play back at predetermined speeds.
To return to normal playback, press the [PLAY]
button.
Note:
• Audio is played back only at x1 speed.
• During reverse playback, video is played back with a gap about
every 0.5 second.
• In JOG mode, smooth playback like with P2 card playback is not
possible.
• The maximum speed for SHTL mode is x20.
1
Switch to the playback or paused state.
2
Press the [PREV] or [NEXT] button.
The set skip operation is performed.
Resume playback (RESUME PLAY)
Setting skip mode (SKIP MODE)
CLIP:
Pressing the [NEXT] or [PREV] button when
paused or during playback moves to the
beginning of the current clip or the begin-
ning of the next or previous clip.
CLIP & INDEX:
Pressing the [NEXT] or [PREV] button when
paused or during playback moves to the
beginning of the current clip, the beginning
of the next or previous clip, or the position
of the next or previous index.
Playing Back AVCHD Clips
Playing and pausing
Slow/fast forward/fast rewind
Clip forward/rewind
