Setup Menu: Menu List
87
Setup Menu
_ is the factory default setting.
REC/PB SETUP
Item
Settings and brief function description
FREQ indications
REC MEDIA
Selects the slots for recording.
P2:
Uses the P2 memory card slots (1 and 2).
microP2:
Uses the microP2 memory card slots (3 and 4).
Note:
Recording is not possible for a slot that is not selected but playback is possible. The slot
indication is the same as that of a card for which recording is prohibited.
FILE SPLIT
Selects whether to split the recording file every 4 GB or record one file when recording to a
microP2 memory card (over 32 GB) in the AVC-LongG format.
ONE FILE:
Records to one file.
SPLIT:
Splits the clip every 4 GB.
Note:
If you select “ONE FILE,” that clip will not be able to be copied to a P2 memory card or a
32 GB microP2 memory card or copied or exported to a storage device.
CC REC
Selects whether to record a closed caption signal superimposed on the SD SDI input signal.
ON:
Records a closed caption signal superimposed on an input signal.
OFF:
Does not record a closed caption signal. The EE output is also blanked.
CC(F1) BLANK
Turns on or off closed caption signals in the first field output from the SD SDI and analog
composite output during playback.
BLANK:
Forcibly blanks signals.
THROUGH:
Does not blank signals.
Note:
In EE mode, the closed captions are output superimposed on the input signal.
CC(F2) BLANK
Turns on or off closed caption signals in the second field output from the SD SDI and analog
composite output during playback.
BLANK:
Forcibly blanks signals.
THROUGH:
Does not blank signals.
Note:
In EE mode, the closed captions are output superimposed on the input signal.
STOP EE SEL
Selects whether to switch to EE mode or playback mode when STOP is pressed.
EE:
EE mode
PB:
Playback mode
SHUTTLE MAX
Sets the maximum speed for the shuttle operation.
X8:
8 x normal speed
X16:
16 x normal speed
X32:
32 x normal speed
X60:
60 x normal speed
X100:
100 x normal speed
FF.REW MAX
Sets the maximum speed for the FF and REW operation.
X32:
32 x normal speed
X60:
60 x normal speed
X100:
100 x normal speed
SEEK:
Seeks (moves to) the beginning of the clip
Note:
• The FF and REW operations for the FF and REW commands from the REMOTE connec-
tor are also performed at 100 x normal speed when “SEEK” is selected. However, when
the “ID OF 9P REMOTE” (
➝
page 91) menu item is set to “ORIGINAL,” the seek (move-
ment) operations are initiated by the FF and REW commands from the REMOTE con-
nector. The cursor moves to the left or right in the thumbnail screen.
• The seek (movement) operations are enabled in playback mode.
SEEK POS SEL
Sets the positions to which to move with the seek (movement) operations performed by
pressing the [NEXT] button and [PREV] button.
CLIP:
Beginning of the clip
CLIP&TEXT MEMO:
Beginning of the clip or the setting point of a text memo
PLAY DELAY
Sets the play delay time in frame increments.
0 to 15:
Frame 0 to frame 15
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
59.94Hz
59.94Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
59.94Hz
50Hz
