Panasonic AJ-HPM100E страница 75 Скачать руководство пользователя

Страница: 75 / 152

Using Play List: Editing Play Lists

U
s

g P

Li
st

You can change the IN and OUT points for a play list event

during video playback.

Open the play list screen.

Select the event you want to change.

Press the EVENT button.

This activates the event edit mode.

Use the operation buttons or search dial to look for a

location to start an event. Then hold down the IN button

and press the ENTRY button.

Use the operation buttons or search dial to look for a

location to end an event. Then hold down the OUT button

and press the ENTRY button.

Press the EVENT button to end the change operation.

◆

NOTE:

• Steps 4 and 5 can be handled as alternatives, you do not have

to carry out both steps.

• If the new IN point comes after an already registered OUT point,

the existing OUT point will be reset. A return to the play list

screen will show that the OUT point has automatically been

changed to the end of the clip.

• If the new OUT point comes before an already registered IN

point, a return to the play list will show that the IN point of that

clip has automatically been changed and registered at the

beginning of the clip.

• An event with a voice-over cannot be modified. Delete the voice-

over before modifying the event.

• The changed content will be neglected if the unit is turned off

during change of an event from video.

You can change IN and OUT points for events in frame

increments (in 4-frame increments at 24PN).

Open the play list screen.

Select the event you want to change.

Use the cursor buttons to change the IN point.

Hold down the IN button and press the TRIM+ button or

the TRIM– button. The IN point is incremented or

decremented in frame increments (in 4-frame increments

at 24PN).

Press the ENTRY button to finalize.

Change the OUT point.

Hold down the OUT button and press the TRIM+ button or

the TRIM– button. The OUT point is incremented or

decremented in frame increments (in 4-frame increments

at 24PN).

Press the ENTRY button to finalize.

Change the SPLIT point

Hold down the SPLIT button and press the TRIM+ or the

TRIM– button. The split point is incremented or

decremented in frame increments (in 4-frame increments

at 24PN).

Press the ENTRY button to finalize.

Changing Event IN and OUT Points

4,5

3,6

Trimming Events

3 3,4,5

Содержание AJ-HPM100E

























































































































































Результаты поиска

Содержание AJ-HPM100E

Отзывы:

Похожие инструкции для AJ-HPM100E

Бренды по названию

Популярные бренды

Panasonic AJ-HPM100E, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM100E

Отзывы:

Похожие инструкции для AJ-HPM100E

Бренды по названию

Популярные бренды