Panasonic AJ-HPM100E Скачать руководство пользователя

Страница: 11 / 152

Included Accessories

Power cord .................................................... 1 (AJ-HPM100P)

2 (AJ-HPM100E)

CD-ROM .................................................................................1

■

Panasonic makes no guarantees for your recordings

Please understand that Panasonic makes no guarantees for your recordings in cases where images and/or sound were not re-

corded as you intended due to problems with this unit or P2 cards.

■

What to remember when throwing memory cards away or transferring them to others

Formatting memory cards or deleting data using the functions of the unit or a computer will merely change the file management

information: it will not completely erase the data on the cards. When throwing these cards away or transferring them to others,

either physically destroy them or use a data deletion program for computers (commercially available) to completely erase the

data. Users are responsible for managing the data on their memory cards.

■

Place of Installation

Do not install this unit in a location exposed to direct sunlight as this may deform the cabinet or damage the LCD screen.

■

Liquid crystal displays

• While 99.99% or more of the pixels on an LCD screen will function normally, 0.01% may either be dead or constantly lit (seen

as red, blue or green dots). This is not a malfunction.

• There may be some unevenness on the screen depending on the image displayed.

• Wiping or rubbing the LCD screen with a rough cloth may damage it.

• Leaving an unchanging image on the screen for a long period of time may create a temporary afterimage (burn-in).

• LCD response and brightness vary with ambient temperature.

• In a high-temperature and high-humidity location, the LCD panel characteristics may change and result in uneven image quality.

*SD logo is a trademark.

■

Information on software for this product

1. Included with this product is software licensed under the GNU General Public License (GPL) and GNU Lesser General Pub-

lic License (LGPL), and users are hereby informed that they have the right to obtain, change and redistribute the source

codes of this software.

Details on GPL and LGPL can be found on the installation CD provided with the unit. Refer to the folder called “LDOC”.

(Details are given in the original (English-language) text.)

To obtain the source codes, go to the following home page:

https://eww.pavc.panasonic.co.jp/pro-av/

The manufacturer asks users to refrain from directing inquiries concerning the source codes they have obtained and other

details to its representatives.

2. Included with this product is software which is licensed under MIT-License.

Details on MIT-License can be found on the installation CD provided with the unit. Refer to the folder called “LDOC”.

(Details are given in the original (English-language) text.)

Содержание AJ-HPM100E

























































































































































Результаты поиска

Содержание AJ-HPM100E

Отзывы:

Похожие инструкции для AJ-HPM100E

Бренды по названию

Популярные бренды

Panasonic AJ-HPM100E, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPM100E

Отзывы:

Похожие инструкции для AJ-HPM100E

Бренды по названию

Популярные бренды