Panasonic AG-CX7, Руководство по эксплуатации

Страница: 63 / 208

Chapter 4 Operation — Menu settings
- 63 -
[AUTO SLOW SHTR]
You can make images brighter by making the shutter speed slower in dark places. The slow shutter works when in the auto shutter mode.
The items that can be set are as follows.
≥
[ON], [OFF]
(Factory setting: [OFF])
@ NOTE
0
In the following case, this cannot be set.
j When using the face detection/tracking AE&AF function
0
The shutter speed changes to the following depending on the frame rate of [SYSTEM] menu
→
[REC FORMAT] and the ambient brightness.
0
When the shutter speed becomes 1/30, 1/25 or 1/24, the screen may be seen as if frames are missed and after images may appear.
[AF SPEED]
Sets the control speed of the auto focus function.
The items that can be set are as follows.
≥ [NORMAL], [SLOW]
(Factory setting: [NORMAL])
[AREA MODE]
Assign the function that is performed within the area selected by touching the LCD monitor while shooting.
(Factory setting: [INHIBIT])
[IR REC]
Switches enable/disable of IR recording. (
l
132)
The items that can be set are as follows.
≥
[ON], [OFF]
(Factory setting: [OFF])
[IR REC COLOR]
The color of IR recording recorded images can be switched.
The items that can be set are as follows.
≥ [WHITE], [GREEN]
(Factory setting: [WHITE])
[FACE DETECT/TRACKING MODE]
Switches the behavior of focus and exposure compensation settings for the face detection/tracking AE&AF function.
(Factory setting: [FACE DETECT/TRACKING AE&AF])
[USER SW]
Sets the function to assign to the <USER1> to <USER5> buttons or the [USER6] to [USER12] button icons.
For details, refer to “Assigning function to the USER buttons”. (
l 46)
Following functions can be assigned to [USER1] to [USER12].
≥
[INHIBIT], [AWB], [DRS], [FBC], [ONE PUSH AF], [S.GAIN], [AREA], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [AE LEVEL], [Y GET],
[O.I.S.], [i.ZOOM], [D.ZOOM], [IR REC], [FAST ZOOM], [PRE REC], [SUPER SLOW], [BACKGR PAUSE], [REC CHECK], [DEL LAST CLIP],
[FOCUS ASSIST], [WFM], [ZEBRA], [LEVEL GAUGE], [LEVEL GAUGE SET], [LCD/VF DETAIL], [FACE DETECT], [MENU], [LOAD SETUP FILE],
[LCD BACKLIGHT], [CARD READER MODE], [STREAMING START], [COUNTER], [RESET], [REAR RING]
Frame rate of [REC FORMAT] Shutter speed
59.94p/59.94i/29.97p 1/30 or more
50.00p/50.00i/25.00p 1/25 or more
23.98p 1/24 or more
[INHIBIT] Disables assignment of functions.
[FOCUS] Assigns the auto focus function.
[IRIS] Assigns the auto iris function.
[Y GET] Assigns the brightness display function.
[FOCUS/IRIS] Assigns the simultaneous operation of the [FOCUS] and [IRIS].
[FOCUS/Y GET] Assigns the simultaneous operation of the [FOCUS] and [Y GET].
[FACE DETECT/TRACKING AF] After detecting faces, faces are tracked while auto focusing.
[FACE DETECT/TRACKING
AE&AF]
After detecting faces, faces are tracked while auto focusing and automatically adjusting exposure.
[USER1] Sets the function to assign to the <USER1> button.
(Factory setting: [LEVEL GAUGE])
[USER2] Sets the function to assign to the <USER2> button.
(Factory setting: [BACKLIGHT])
[USER3] Sets the function to assign to the <USER3> button.
(Factory setting: [O.I.S.])