Panasonic AG-CX7 Скачать руководство пользователя страница 148

Страница: 148 / 208

Chapter 6 Playback

—

Thumbnail operation

- 148 -

[FRAME RATE]

Displays the frame rate for super slow recording.

[GAMMA]

Displays the gamma of the clip.
Displayed when the [SYSTEM] menu

→

[FILE FORMAT] is set to other than [AVCHD].

Copying clip

Clips can be copied between memory cards.
(For the

)

Only the clip recorded in AVCHD can be copied.

(For the

)

Only the clip recorded in P2 or AVCHD can be copied.

Press the <THUMBNAIL> button.

The thumbnail screen is displayed.

Press the <MENU> button while the thumbnail screen is displayed.

The menu is displayed.

Select the [THUMBNAIL] menu

→

[CLIP]

→

[COPY]

→

[SELECT].

≥

Selecting [ALL] copies all the clips between the memory cards.

Select the card slot for the copy destination.

[SLOT1

→

SLOT2]:

Copies clips from the memory card in card slot 1 to the memory card in card slot 2.

[SLOT2

→

SLOT1]:

Copies clips from the memory card in card slot 2 to the memory card in card slot 1.

The clips on the memory card of the copy source is displayed in the thumbnail screen.

Select the clip to copy in the thumbnail screen.

is displayed on the selected clip.

Select [

≥

This can also be selected by pressing and holding the multidial.

When the confirmation message is displayed, select [SET].

Progress bar is displayed, and the copy of the clip starts.

≥

(For the

)

[OVERWRITE?] is displayed when there is a same P2 clip in the copy destination. Select [SET] when overwriting the clip, and select [

] when not

overwriting the clip.

≥

To cancel the copy midway, select [CANCEL].

When the completion message is displayed, select [

NOTE

When there are a large number of clips, it may take longer to copy the clips.

The clip whose recording file format is MOV/MP4 cannot be copied.

The copy is not possible when the volume of the selected clip is larger than the available card capacity of the destination.

It cannot copy when the copy destination card is write protected.

The copy is not possible when the maximum number of the clips will exceed.

The copy is not possible when the maximum number of the playlist will exceed.

It may not be possible to copy clips recorded on other equipment. Data that was recorded on a computer cannot be copied.

The protection setting for clips is cleared when they are copied.

The order of clips copied cannot be changed.

(For the

)

The P2 clip exceeding 4 GB cannot be copied to a memory card of 32 GB or less.

The P2 clip recorded over multiple memory cards cannot be copied to a same memory card.

When deleting clips after copying is complete, before deletion make sure you play back the copied clip to confirm that it has been copied
properly.

CX7

CX8

CX10

0001

00:08:17.15

0002

00:08:47.15

0003

00:09:11.00

0004

00:09:32.15

0005

00:09:50.15

0006

00:10:08.00

0007

00:10:20.15

0008

00:10:38.15

0009

00:10:52.15

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

モヷヤラュヱラ

ョラュブペハペフ

ㄊㄊ

CX10

Содержание AG-CX7

















































































































































































































Результаты поиска

Содержание AG-CX7

Отзывы:

Похожие инструкции для AG-CX7

Бренды по названию

Популярные бренды

Panasonic AG-CX7, Руководство по эксплуатации

Результаты поиска

Содержание AG-CX7

Отзывы:

Похожие инструкции для AG-CX7

Бренды по названию

Популярные бренды