background image

Preparation

6

Battery caution

L

We recommend using the battery(ies) 
noted on page 4. 

Use only 

rechargeable battery(ies).

L

Do not mix old and new batteries.

L

Do not dispose of the battery(ies) in a 
fire, as they may explode. Check with 
local waste management codes for 
special disposal instructions.

L

Do not open or mutilate the 
battery(ies). Released electrolyte 
from the battery(ies) is corrosive and 
may cause burns or injury to the eyes 
or skin. The electrolyte may be toxic if 
swallowed.

L

Exercise care when handling the 
battery(ies). Do not allow conductive 
materials such as rings, bracelets or 
keys to touch the battery(ies), 
otherwise a short circuit may cause 
the battery(ies) and/or the conductive 
material to overheat and cause burns.

L

Charge the battery(ies) provided with 
or identified for use with this product 
only in accordance with the 
instructions and limitations specified 
in this manual.

L

Only use a compatible base unit (or 
charger) to charge the battery(ies). Do 
not tamper with the base unit (or 
charger). Failure to follow these 
instructions may cause the 
battery(ies) to swell or explode.

Notice for product disposal, transfer, 
or return

L

This product can store your 
private/confidential information. To 
protect your privacy/confidentiality, we 
recommend that you erase the 
information such as phonebook or 
caller list entries from the memory 
before you dispose, transfer or return 
the product.

Information on Disposal for Users of 
Waste Electrical & Electronic 
Equipment (private households)

This symbol on the products and/or 
accompanying documents means that 
used electrical and electronic products 
should not be mixed with general 
household waste. For proper treatment, 
recovery and recycling, please take 
these products to designated collection 
points, where they will be accepted on a 
free of charge basis. Alternatively, in 
some countries you may be able to 
return your products to your local retailer 
upon the purchase of an equivalent new 
product.
Disposing of this product correctly will 
help to save valuable resources and 
prevent any potential negative effects on 
human health and the environment 
which could otherwise arise from 
inappropriate waste handling. Please 
contact your local authority for further 
details of your nearest designated 
collection point.
Penalties may be applicable for incorrect 
disposal of this waste, in accordance 
with national legislation.

For business users in the European 
Union

If you wish to discard electrical and 
electronic equipment, please contact 
your dealer or supplier for further 
information.

TG8280FX(e).book  Page 6  Tuesday, September 11, 2007  1:52 PM

Содержание 2Line KX-TG8280FX





























































Отзывы: