Panasonic 2Line KX-TG8280FX Скачать руководство пользователя страница 53

Страница: 53 / 60

Useful Information

Noise is heard during a
call.

You are using the handset or base unit in an area with
high electrical interference. Place the handset and
base unit away from interference sources, such as
antennas and mobile phones.

The handset/base unit
stops working while
being used.

Disconnect the base unit AC adaptor and turn off the
handset. Reconnect the base unit AC adaptor, turn on
the handset and try again.

The handset beeps
intermittently and/or

flashes.

Fully charge the batteries (page 13).

I fully charged the
batteries, but

still

flashes.

Clean the charge contacts and charge again
(page 13).

It is time to replace the batteries (page 12).

I fully charged the
batteries, but the
operating time seems
to be short.

Wipe the battery ends (

) and the unit contacts

with a dry cloth.

Caller information is not
displayed.

You need to subscribe to Caller ID service. Consult
your service provider/telephone company for details.

Your unit is connected to a telephone line with DSL
service (page 55).

I cannot register a
handset to a base unit.

The maximum number of handsets (6) are already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 43).

You entered the wrong PIN. If you forget your PIN,
consult your nearest Panasonic service centre.

Place the handset and the base unit away from other
electrical appliances.

I do not know how to
erase

(Missed call)

from the display.

There are unviewed missed calls remaining. View
them using the following method.

(middle soft key)

Press

{V}

to search from the most recent call, or

press

{^}

to search from the oldest call.

I cannot establish a
conference call.

A conference call cannot be established in the
following instances;
– the base unit’s settings or the answering system is

currently in use

– a conference call has already been established on

another line

– an intercom call is currently being made by another

user

Wait for the other user to finish.

Problem

Cause & solution

TG8280FX(e).book Page 53 Tuesday, September 11, 2007 1:52 PM

Содержание 2Line KX-TG8280FX





























































Результаты поиска

Содержание 2Line KX-TG8280FX

Отзывы:

Похожие инструкции для 2Line KX-TG8280FX

Бренды по названию

Популярные бренды

Panasonic 2Line KX-TG8280FX, Руководство по эксплуатации

Результаты поиска

Содержание 2Line KX-TG8280FX

Отзывы:

Похожие инструкции для 2Line KX-TG8280FX

Бренды по названию

Популярные бренды