L
Base Unit Settings
31
Special instructions
for call options
Setting call restriction
The dialling of certain numbers can be
restricted. You can assign up to 6 phone
numbers for each line, and select which
unit (the base unit and/or selected
handsets) to be restricted. Storing area
codes will prevent the restricted units
from dialling any phone number in that
area code.
1
"
(middle soft key)
i
L
i
#
2
{^}
/
{V}
:
“
Call Options
”
i
#
3
{^}
/
{V}
:
“
Call Restrict
”
i
#
4
Enter the base unit PIN (default:
“
0000
”
).
L
If you forget your PIN, consult
your nearest Panasonic service
centre.
5
{^}
/
{V}
:
“
Line1
”
or
“
Line2
”
i
#
L
The base unit extension number
“
0
”
and the extension numbers of
all registered handsets will be
displayed.
6
Set which extensions will be
restricted by pressing the desired
number.
L
Flashing numbers indicate call
restriction is turned on for the
corresponding extension.
L
To turn call restriction off for an
extension, press the number
again. The number will stop
flashing.
7
#
8
{^}
/
{V}
: Select a memory location.
i
#
9
Enter the phone number or area
code to be restricted (8 digits max.).
i
#
i
{ih}
L
To erase a restricted number,
press
{
C/
T
}
.
Special instructions
for other options
Changing the unit’s region
setting/Resetting the base
unit
1
"
(middle soft key)
i
L
i
#
2
{^}
/
{V}
:
“
Other Options
”
i
#
3
{^}
/
{V}
:
“
Country
”
i
#
4
{^}
/
{V}
: Select the desired country.
i
#
5
{^}
/
{V}
:
“
Yes
”
i
#
i
{ih}
Note:
L
The following items will be deleted or
reset to their default settings:
– Settings listed on page 29, 41
– Caller list
L
The following items will be retained:
– Date and time
– Repeater mode
– Recordings, including your greeting
message, caller messages, and
recorded conversations
L
If you select the desired country in
step 4, the following default settings
“
T
ü
rkiye
”
=
Turkey
“
Slovensko
”
=
Slovakia
“
Česká republika
”
=
Czech
“
Other
”
=
countries except Turkey,
Slovakia and Czech
TG8280FX(e).book Page 31 Tuesday, September 11, 2007 1:52 PM
