Panametrics PT878GC Скачать руководство пользователя страница 63

Страница: 63 / 224

TransPort™ PT878GC User’s Manual

Chapter 4.

The next prompt appears if you have selected a fixed pressure. The PT878GC asks for the fixed pressure value.

Press

[ENTER]

to open the text box.

Use the numeric keys to enter the known pressure.

Press

[ENTER]

to confirm the entry.

Whether you have selected a fixed or an active supply, the PT878GC asks for the desired input.

From the Pressure text box, press the [



] arrow key to reach the Input # menu.

Press

[ENTER]

to open the drop-down menu.

Scroll to Input A or B.

Press

[ENTER]

to confirm the entry.

The next prompt asks if the temperature is fixed or active.

Use the [



] and [



] keys to scroll to the appropriate radio button.

Press

[ENTER]

to confirm your selection.

The next prompt appears if you have selected a fixed temperature. The PT878GC asks for the fixed temperature

value.

Press

[ENTER]

to open the text box.

Use the numeric keys to enter the known temperature (in degrees C or F), and press

[ENTER]

to confirm the

entry.

Whether you have selected a fixed or an active temperature, the PT878GC asks for the desired input.

Press

[ENTER]

to open the drop-down menu.

Scroll to Input A or B.

Press

[ENTER]

to confirm the entry.

Note:

If you have switched both active inputs to #A (or to #B), the PT878GC automatically switches one input to

the other letter. This change ensures that only one analog input is assigned to one measurement type.

Pressing the [



] key returns the meter to the Inputs tab.

•

To confirm the entries and return to Operate Mode, press

[F3]

(OK).

•

To leave the window without confirming the entries and return to Operate mode, press

[F2]

(Cancel) or the

[ESC]

key.

Содержание PT878GC

































































































































































































































Результаты поиска

Содержание PT878GC

Отзывы:

Похожие инструкции для PT878GC

Бренды по названию

Популярные бренды

Panametrics PT878GC, Инструкция по эксплуатации

Результаты поиска

Содержание PT878GC

Отзывы:

Похожие инструкции для PT878GC

Бренды по названию

Популярные бренды