Panametrics PT878GC, Инструкция по эксплуатации

Страница: 136 / 224

Chapter 8.
126 TransPort™ PT878GC User’s Manual
Figure 117: The General Log Format Window
To step through each parameter, press the [

] key.
1. The first prompt asks you to choose between a linear or circular format for the log. (A linear log stops when it
reaches a specified end time or the PT878GC runs out of memory, while a circular log runs continuously until
manually stopped.)
a. Use the [

] and [

] keys to scroll to the appropriate radio button.
b. Press [ENTER] to confirm your selection.
2. The next prompt asks you to choose whether the log is to be a standard log, recording specified data, or an error
log (one which records error conditions).
a.
Use the [

] and [

] keys to scroll to the appropriate radio button.
b. Press [ENTER] to confirm your selection.
3. The next prompt asks for the starting date and time.
a.
Press
[ENTER]
to enter the text box. The meter highlights the first number. Use the [

] and [

] keys to scroll to any
number you wish to change, or the [

] key to scroll to the time box.
b. Two alternatives are available to change a highlighted number:
• Use the numeric keys to enter the desired number.
• Use the [

] or [

] arrow keys to scroll, in 1-digit increments, to the desired number. (For example, if the text
box displays 09, pressing the [

] key twice changes the number to 07.) You can scroll from 01 to 12 for the
month and from 01 to 31 for the day (depending on the number you have selected for the month).
c. In either case, press [ENTER] to confirm the entry.
4. Follow the same procedure to enter the end date and time.
5. The final prompt in this window asks for the logging interval.
a.
Press
[ENTER]
to open the text box.
b. Use the numeric keys to enter the desired interval in seconds.
c. Press [ENTER] to confirm the entry.
6. You have completed entering parameters in this window. To select the measurements,
a.
Press the [

] key to return to the Format prompt.
b. Then press the [

] key to return to the General tab.
General Measurements
Cancel
Activate
Log Name 10SEC.LOG
End Date/Time
Standard
Error
Linear
Circular
Type
Format
Logging Interval
Start Date/Time 01:38:08
2004/11/01
10
09:38:08
secs
2004/11/01