Panametrics DigitalFlow GC868, Руководство по программированию, Страница: 70 / 134

Chapter 4. Printing Data
4-5 DigitalFlow™ GC868 Programming Manual (2-Channel)
4.3.1 Numeric Format
After the numeric format (and starting page and number of pages, if applicable) is
chosen, the Model GC868 returns to the standard data display screen and begins
printing the log file. The printout continues until the entire log has been printed or
until a STOP command is issued (see the instructions for the STOP submenu). A
portion of a typical printout is shown in Figure 4-3 below.
Figure 4-3: Typical Numeric Printout
4.3.2 Graphical Format
After the graphical format (and starting page and number of pages, if applicable) is
chosen, complete the following additional steps:
7. Enter the desired maximum value for the
Y
(vertical)
axis
and press [ENT] .
Note:
Enter a
Y AXIS MAX
value that is larger than the largest logged
measurement value.
8. At the Y Range prompt, press [F1] to show only the positive Y axis or press [F2] to
display both the positive and negative y axis.
The Model GC868 returns to the standard data display screen and begins printing
the log file. The printout continues until the entire log has been printed or until a STOP
command is issued (see the instructions for the STOP submenu). A portion of a
typical printout is shown in Figure 4-4 below.
Figure 4-4: Typical Graphical Printout
Start Time
End Date
End Time
HH:MM:SS
11:50:45 A
11:50:55 A
11:51:05 A
11:51:15 A
ACF/HR
686.85
675.59
662.28
666.71
VOLUM
ACF
224.84
222.70
220.83
218.92
+TOTL
FT/S
1039.511
1039.509
1039.003
1039.147
SNDSP
Start Date
LOG MESSAGE
LOG NAME Page# 1
LOG DUMP
09 SEP 97
11:50:43 AM
09 SEP 97
11:54:45 PM
Ch1 Ch1 Ch2
0.0
.1
.2
.3
.4
.5
.6
.7
.8
.9
1.0
0.0
.1
.2
.4
.3
.5
.7
.6
.8
.9
1.0
CHANNEL NAME CHANNEL MESSAGE
X-AXIS 50 seconds PER-DIV
Y-AXIS MAX 500 ACF/M
START TIME
03:27:01 PM
20 OCT 97
END TIME
03:28:46 PM
20 OCT 97