Panametrics DigitalFlow GC868, Руководство по программированию, Страница: 107 / 134

DigitalFlow™ GC868 Programming Manual (2-Channel) C-4
Appendix C. Programming with PanaView
C.4 Adding the
GC868
To add the GC868 on the IDM-configured communications port, complete the
following steps:
1. Highlight the communication port to which the meter will be added by clicking
on it, and then open the
“Edit”
menu on the menu bar (if the communication port
is not highlighted first, the
“New Meter”
option is not active in the
“Edit”
menu).
2. Click on the “New” option in the “Edit” menu (see Figure C-4 below).
Figure C-4: “New” Option in the “Edit” Menu
3. After clicking on the
“New”
option, the
“Meter”
menu option appears. Click on this
option to select it.
4. The
“New IDM Meter”
screen (shown in Figure C-5 below) opens. Enter the Net-
work ID number for the meter, and click [OK].
Figure C-5: New IDM Meter Screen
IMPORTANT:
The Network ID number must match the Network ID programmed in
the meter’s Communications menu.
If the initialization is successful, the Meter Browser shows a listing similar to
Figure C-6 below.