Palm Tungsten Tungsten W, Начало работы

Страница: 8 / 40

2
Start here
for the settings that are not transferred, you need to find them on
your old handheld.
■
If you used either MultiMail ® SE or MultiMail Deluxe on your old
Palm handheld, and if you plan to use your old handheld’s
username on your Tungsten W handheld, the saved e-mail and
account settings are upgraded automatically when you perform
your first HotSync
® operation in “Step 7: Install Palm™ Desktop
software.”
■
Mac:
You cannot use the same username on your new Tungsten W
handheld as you used on your old handheld. When you install
Palm Desktop software in Step 7, you must create a new username.
IMPORTANT
If (1) you used the VersaMail™ application on your new
Tungsten W handheld before your first HotSync operation and (2) you
upgraded using your username from your old Palm handheld, you must
perform a hard reset on your Tungsten W handheld. Then, before you do
anything else, perform a HotSync operation. See “Upgrading from
another Palm™ handheld” in “Troubleshooting.”
Understand how your wireless service works
Some of the steps that follow depend on choices you made in your
contract with your wireless service provider. Read the wireless service
provider’s documentation to understand your service contract.
You need answers to the following questions:
■
Is your contract with your wireless service provider for voice only,
data only (GSM and/or GPRS), or for both voice and data? To take
full advantage of your Tungsten W handheld, you need both voice
and data capability.
■
What are your usernames and passwords for your e-mail and
voicemail accounts?
Review the contents of your handheld package
■
Your power adapter may be different from the one pictured below.
■
If your handheld package does not contain a subscriber identity
module (SIM) card, read the opening paragraphs of “Step 3: Insert
the SIM card.”