Palm Tungsten Tungsten W, Начало работы

Страница: 10 / 40

4
Charge and set up your handheld
Charge and set up your handheld
Step 1: Connect the adapter and charge your handheld
If you are upgrading from another Palm™ handheld and have a Palm
cradle already connected, be aware that not all cradles are compatible
with your new handheld. We recommend that you use the cradle
included in the package with your handheld.
NOTE
Windows NT and 95, and systems without USB ports,
require the Palm HotSync ® Cradle-Serial, SKU 10828U, sold
separately. A serial port is shown at right.
1.
Plug the power adapter into an
outlet and the HotSync cradle.
NOTE
Your power adapter may
connect to the cable of the
cradle, not to the cradle itself.
2.
Place your Tungsten™ W
handheld into the cradle.
3.
Check that the charging
indicator light is solid green.
This means your handheld is
properly seated in the cradle
and is being charged.
NOTE
If the indicator light did
not go on, see “Charging the
handheld,” in “Troubleshooting.”
4.
Charge for a full two hours.
A minimum charge of one hour
is enough to set up the
handheld, but two hours is
recommended.
5.
Remove the plastic sheet
protecting the screen.
Charging indicator light
When properly seated, there is a
small gap between the front of the
handheld and the cradle