Palm Tungsten Tungsten W, Начало работы

Страница: 13 / 40

7
Connect to the wireless network
3.
On the back panel of your handheld, slide a thin, flat edge (similar
to your thumbnail) into the indent and under the access door until
the access door opens.
4.
Do one of the following:
–
If a sample SIM card is present
(look for the Sample SIM label),
remove it. Then slide the SIM
card into place on the access
door. Close the access door.
–
If the real SIM card is present
(look for the gold contact area),
close the access door.
Step 4: Turn on the Mobile application
Turning on the Mobile application connects you to the wireless
network, so before doing so, be sure to complete all registration and
activation processes required by your wireless service provider.
Information about these processes may be included in the
documentation provided by your wireless service provider.
IMPORTANT
Do not use the VersaMail™ application before performing
your first HotSync ® operation, if you are upgrading and plan to use your
username from your old handheld on your Tungsten™ W handheld.
After removing the sample SIM
card, slide the real SIM card
into place on the access door
Gold
contact
area