Palm Tungsten Tungsten W, Начало работы

Страница: 14 / 40

8
Connect to the wireless network
To turn on the Mobile application:
1.
Hold down the Wireless button until the Mobile dialog box
appears.
2.
If prompted, enter the personal identification number (PIN) given
to you by your wireless service provider.
3.
Tap On in the Mobile dialog box.
The application searches for a connection to the wireless service in
your area. This may take up to 30 seconds.
4.
Confirm that the connection is established.
–
Slow-blinking green light:
A
connection to the wireless service
is established.
–
Slow-blinking red light
: Mobile is
on, but you are in an area where
there is no coverage. Move to an
area where the signal is stronger,
such as near a window or outside.
If after you move, the indicator light is still slow-blinking red, do
the following:
– See “Establishing a wireless connection,” in “Troubleshooting”
for additional ways to improve signal strength.
– Verify with your wireless service provider that service has been
activated for your handheld.
Wireless button
Blinking green indicator light