Palm Tungsten Tungsten W, Начало работы

Страница: 30 / 40

24
Troubleshooting
your handheld, press Up on the navigator. The Digitizer screen
appears; follow instructions to recalibrate your handheld screen.
IMPORTANT
If you want to back out of the hard reset, do not press Up
on the navigator; instead, press any application button on the front of
your handheld. This action performs a soft reset. Pressing a keyboard
key has no effect.
5.
Follow the instructions that appear on the handheld screen.
6.
Perform a HotSync operation.
Problem: You are an upgrader using a Mac, and the wireless connection on your
handheld attempts to use previous network settings.
When you attempt to browse or send e-mail, the wireless data may try
to connect through your previous network settings rather than the
Mobile application. This problem can occur if during the upgrade
process, some of the settings overwrote the network settings on your
handheld that were set by your wireless service provider. To find the
new settings, go to
www.palm.com/support/tungstenw
.
Problem: Upgrading from a Palm m515 handheld is incomplete.
When upgrading from a Palm m515 handheld, if the memory on the
m515 handheld is almost full, you may not be able to transfer all
applications and data to your Tungsten™ W handheld.
Charging the handheld
This problem may occur during Step 1.
Problem: The indicator light does not go on.
Try the following:
■
Make sure your handheld is properly seated in the cradle.
■
Make sure the power adapter is properly connected to the cradle.
■
Make sure the power adapter is plugged into a working electric
outlet.