Palm Tungsten Tungsten W, Начало работы

Страница: 12 / 40

6
Connect to the wireless network
Connect to the wireless network
Step 3: Insert the SIM card
With the subscriber identity module (SIM) card inserted, you can use
your handheld’s wireless features, such as the mobile phone, SMS,
web browser, and wireless e-mail. Without the SIM card, you can
operate your handheld, but you cannot use the wireless features.
IMPORTANT
This handheld is preconfigured to work with the SIM card
provided by a specific wireless service provider. Any other carrier
network requires a different device configuration and is not supported
by Palm.
Most likely, the SIM card either is in your package or was handed to
you by a representative of your wireless service provider. In some
cases, however, the SIM card is already installed in your handheld.
Open the access door and either verify the presence of the SIM card or
insert it.
To insert the SIM card or verify its presence:
1.
Turn off your handheld.
IMPORTANT
Turning off the handheld prevents static discharge that
could damage the connector.
2.
If you have the SIM card attached to its plastic holder, carefully
detach the SIM card from the holder. (See “Review the contents of
your handheld package” for an illustration of the SIM card
detached from its plastic holder.)