04/2010
Einscheibenschleifmaschine UNO, Artikel-Nr. 059629
17
System carbide milling wheel disc, Item-No. 020944
:
for removing adhesives, PU- and epoxy-coatings and roughening anhydrite pavements („beating“ action) Due
to the aggressive action, the system milling discs should not be used onto chip board.
Milling disc with star wheel segments, Item-No. 014243
Additional to the new System-milling-disc the milling disc with star wheel segments offers high efficiency.
Producing a high effect of dismounting and an aggressive action, this disc is used for removing coatings and
adhesive residues. The result is a rough surface. Comes with 4 star wheel segments.
Cleaning pad discs 400 mm, 10 mm
For initial cleaning, Item-No. 013543, For cleaning and mounting of gauze
For maintenance, Item-No. 013544, For coarse cleaning and removing soil
For polishing, Item-No. 013545, For polishing, cleaning and wax coating
Super pad discs 400 mm, 20 mm
For initial cleaning, Item-No. 013546, For cleaning strong soiling
For maintenance, Item-No. 013547, For coarse cleaning and removing soil
For polishing, Item-No. 013334, For polishing, cleaning and wax coating
7.0 Trouble shooting
Trouble
Eventual cause
Elimination
Machine does not
Power supply
Have machine
start
Disconnected
repaired by a qualified
blown fuse
electrician,
defective cable or plug
resp. change parts
Assembly of handle wrong
Assemble handle like
described in Item 5.0
Switch-on lever (4)
Safety lever (4) can only be
Lower the handle of
cannot be actuated
actuated, if handle not vertical
the machine