04/2010
Einscheibenschleifmaschine UNO, Artikel-Nr. 059629
6.2 Description of grinding, milling and cleaning discs
Paper grinding discs double sided, 375 x 40mm
Grade 16,
Item-No 013531,
Grinding of subfloors
Grade 24,
Item-No 013527,
Preparing and grinding of dirty screeds
Grade 40,
Item-No 013528,
Grinding and levelling smoothing compounds
Grade 60,
Item-No 013529,
Finish-grinding of smoothing compounds
Grade 80,
Item-No 013530,
Grinding and abrading timber surfaces
Grinding gauze double sided, 400mm
Grade 60,
Item-No 013548,
Grinding of parquet varnish, coatings and old surfaces
Grade 80,
Item-No 013331,
Fine-grinding of surfaces
Grade 100,
Item-No 013332,
Fine-grinding of surfaces
Grade 120,
Item-No 013333,
Fine-grinding of surfaces
Grade 180,
Item-No 013549,
Fine-grinding of surfaces,
grinding/polishing of p cork
Carbide grinding disc
Dismounting action much more aggressive compared to paper disc. High grinding efficiency. High tool life
(10 times higher as paper grinding discs).
Disc does not clog, due to open grains. Disc can be cleaned. Silicone or wax-spray can be used additionally
to reduce adhesion.
Grade 16,
Item-No 013510, Abrading of anhydrite-screed, removing of dirt and adhesive residues
Grade 24,
Item-No 013517, For abrading and rough grinding
Cylindrical brush disc, Item-No. 015735
For preparing new anhydrite- and magnesia-screeds.
For abrading of anhydrite- screed, for abrading areas contaminated with paint, mortar, felt-, foam- and
adhesive residues.
Corrugated steel-brush disc, Item-No. 013539
For brushing and preparation of subfloors. For removing the loose sintered material on new anhydrite- and
magnesia screed.
Flat steel brush disc Item-No. 015738
For removal of foam, felt and hessian backing residues. For abrading anhydrite and self-levelling screeds, for
industrial cleaning. Brush length 45 mm. The open brushes work well with tacky residues. The brushes do not
clog.
Grinding disc with 6 stones K20 Item-No. 013540
For grinding uneven areas of screed and levelling compounds, paint or gypsum residues. Sharp edges give
high efficiency.
System-milling-disc
The system milling disc can be equipped with different interchangeable milling modules. The system-discs
are available complete, or, as single modules
Use:
System carbide milling disc
,
Item-No. 013569: for removing thick adhesive residues and fibre-, felt- and foam residues (scraping action)
System diamond milling disc, Item-No. 020943
for grinding extremely hard smoothing compounds and industrial floors, as well as epoxy- and polyester coatings
16
