Pall Stax, Инструкция по эксплуатации

Страница: 10 / 16

Appendix B: Chassis User Instructions — Process Scale 5 and 10 High
Stax Process Scale Chassis User Instructions
1. Process Chassis Sizes
The Stax process scale chassis is available in two sizes: 5-high and 10-high with two base
styles, floor or wheel mounted.
Figure 2
10
USD 2554c
Typical Chassis Configurations (Drawings not to scale)
2. Process Chassis Operation
1. With the clamping lever in the unlocked position, the
clamping head can be moved up and down to suit the
number of capsules required in the stack by rotating the
top handle.
2. When the clamping head is in the required poisition, it
must be locked in place by moving the clamping lever
to the locked position.
3. Process Chassis Operation Clamping Head
Lock Position
1. Move the clamping lever to the unlocked position.
The clamping plate moves forward.
2. Rotate the top handle to move the clamping head to
the required height. Align the clamping head with the
thin grooves in the support legs.
3. Move the clamping lever to the locked position.
The clamping head moves backwards.
4. Check to ensure that the clamping head is locked.
216495 - Pall Europe Ltd GN12.5291.qxd:Layout 1 1/6/12 14:10 Page 10