Palfinger MBB C 1000 S Скачать руководство пользователя

Страница: 121 / 196

121

Lifting the Platform



Press the pushbuttons

(27)

and optionally

(29)

simultane-

ously and hold them in this position until the platform has
reached the vehicle loading floor height.

The platform tilts to the horizontal or preset position before
it is lifted.

Setting the Platform to its Horizontal Position



To adjust a steeper tilt of the platform, press both
pushbuttons

(27), (32)

and optionally

(29)

simultaneously

and hold them in this position until the platform has reached
the required tilt angle.



To adjust a flatter tilt of the platform, press both
pushbuttons

(28), (32)

and optionally

(29)

simultaneously

and hold them in this position until the platform has reached
the required tilt angle.

Extending and Folding Out the Platform



Loosen the platform interlock (if present).



Press the pushbuttons

(28)

and optionally

(29)

simultane-

ously and hold them in this position until the platform has
completely lowered.

The platform is lowered so that it can be extended without
obstruction.



Press the pushbutton

(30)

and hold it in this position until

the platform is completely extended.



Press the pushbuttons

(28)

and optionally

(29)

simultane-

ously and hold them in this position until the folded platform
has made contact with the ground.



Protect your hands with gloves.



Pull the handle with both hands to unfold the folding part of
the platform.

Folding In and Retracting the Platform



Protect your hands with gloves.



Pull the handle with both hands to fold back the folding part
of the platform.



Close the platform interlock (if present).



Press the pushbuttons

(27)

and optionally

(29)

simultane-

ously and hold them in this position until the platform has
reached the retraction height.

Betriebsanleitung_Hubladebuehnen_EN.book Seite 121 Donnerstag, 15. August 2019 4:04 16

Содержание MBB C 1000 S





































































































































































































Результаты поиска

Содержание MBB C 1000 S

Отзывы:

Похожие инструкции для MBB C 1000 S

Бренды по названию

Популярные бренды

Palfinger MBB C 1000 S, Руководство по эксплуатации

Результаты поиска

Содержание MBB C 1000 S

Отзывы:

Похожие инструкции для MBB C 1000 S

Бренды по названию

Популярные бренды