Palax Power 100S
Translation
1-2017
16
Fig. 6
The Power 100S is equipped with a special Palax Optimi cutting length adjuster, which ad-
justs the stroke length of the splitting cylinder in accordance with the actual cutting length.
The cutting length is adjusted hydraulically using the control lever in the centre and the
scale (Fig. 6) at the right side of the machine’s main frame.
3.3 Bringing the conveyor in work position
Fig. 7
1.
Pull down the conveyor and leave it sup-
ported by the winch ropes and the tip wheel. Re-
move the conveyor chain holder from under the
conveyor.
Fig. 8
2.
Lower the conveyor with the winch and
lock it in a straight position using the split cotters.
Adjust the correct cotter gap with the locking pins.
The recommended gap is about 0.5 - 1 mm.
LO CK
COTTERS
