Palax Power 100S
Translation
1-2017
21
Only use fault-free PTO shafts and always attach the chains for the shaft-guard to the
machine (Fig. 16).
Before starting up the PTO shaft, always ensure that the shaft is properly fastened, and
sufficient space has been reserved for it.
Figs. 16 and 17
When you disconnect the PTO shaft from the tractor, hang it on the hook (Fig. 17) on
the machine.
The suitable range of speeds for the PTO shaft is from min. 450 to max. 480 rpm.
NOTE !
The PTO shaft must absolutely be removed from the machine for trans-
portation by trailer!
4.2
Emergency stop switch for a tractor-powered machine
The tractor-powered machine comes with a special emergency stop device that imme-
diately stops the transmission from the angular gear to the machine. This stops all op-
erations of the machine.
In an emergency situation, pull the lever (Fig. 18) downward to the point where it locks.
In this position, the V-belts are loose.
Fig. 18
