Palax Power 100S
Translation
1-2017
33
detent end
Screw
Fig. 25 Fig. 26
1. Only open the cover on the spool detent end.
2. When the cover is removed, the spool must not be shifted, as the balls inside the
detent bushing can easily fall out and get lost.
Spray thin CRC-type lubricating oil generously into the detent end.
3. Attach the cover casing.
The same grease is used on the joint head as on the ball-bearings.
You can also spray lubrication oil through the hole in the head of the detent end.
7.13 Tightening the conveyor chain
The conveyor is hydraulically driven and equipped with automatic tightening of the
chain.
NOTE !
As you bring the conveyor to the work position, check that at the lower
end, the chain rests on the drive roller, and that at the top end it rests on the tight-
ening roller.
7.14 Cleaning the conveyor
Keep the conveyor free of debris to ensure its trouble-free operation.
Especially in winter, it is important that the conveyor is always cleaned at the end of
every working session.
The conveyor can also be washed with a high-pressure washer. The conveyor chain
must be lubricated after high-pressure washing.
7.15 Washing the machine
Wash the machine occasionally with a high-pressure cleaner. This is especially im-
portant if the machine is left standing for a longer period of time. Lubricate the machine
after washing.
NOTE !
Do not direct the water jet onto electric devices or bearings
.
7.16 Storing the machine.
The machine is intended for outdoor use but it is recommended to keep it under cover
for longer standstills to avoid corrosion or malfunctions.
