manualshive.com logo in svg

paladin HARLEY POWER BOX RAKE T6, Руководство оператора и каталог запасных частей

Поделиться
Скачать
paladin HARLEY POWER BOX RAKE T6 Скачать руководство пользователя страница 6

MODEL T6 

HARLEY POWER BOX RAKE®   

5

SAFETY STATEMENTS

This statement is used where serious injury or death will result if the instruc-

tions are not followed properly.

This statement is used where serious injury or death could result if the instruc-

tions are not followed properly.

This statement is used where minor injury could result if the instructions are 

not followed properly.

This statement is used where equipment or property damage could result if 

the instructions are not followed properly.

This symbol by itself or used with a safety signal word throughout this manual 

is used to call your attention to instructions involving your personal safety or 

the safety of others.  Failure to follow these instructions can result in injury or 

death.

GENERAL SAFETY PRECAUTIONS

READ MANUAL PRIOR TO INSTALL

Improper installation, operation, or maintenance of this equipment could result 

in serious injury or death. Operators and maintenance personnel should read 

this manual as well as all manuals related to this equipment and the prime 

mover thoroughly before beginning installation, operation, or maintenance. 

FOLLOW ALL SAFETY INSTRUCTIONS IN THIS MANUAL AND THE 

PRIME MOVERS MANUAL.

READ AND UNDERSTAND ALL SAFETY STATEMENTS

Read all safety decals and safety statements in all manuals prior to operat-

ing or working on this equipment.  Know and obey all OSHA regulations, local 

laws and other professional guidelines for your operation.  Know and follow 

good work practices when assembling, maintaining, repairing, mounting, re-

moving, or operating this equipment.

KNOW YOUR EQUIPMENT

Know your equipment’s capabilities, dimensions, and operations before op-

erating.  Visually inspect your equipment before you start and never operate 

equipment that is not in proper working order with all safety devices intact.  

Check all hardware to assure it is tight.  Make certain that all locking pins, 

latches, and connection devices are properly installed and secured.  Remove 

and replace any damaged, fatigued, or excessively worn parts.  Make certain 

all safety decals are in place and are legible.  Keep decals clean and replace 

them if they become worn and hard to read.

DANGER

WARNING

CAUTION

NOTICE

WARNING

WARNING

Содержание HARLEY POWER BOX RAKE T6



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды