manualshive.com logo in svg

PairGain HIGAIN HLU-232, Руководство пользователя

Поделиться
Скачать
PairGain HIGAIN HLU-232 Скачать руководство пользователя страница 70

Section 150-232-174
Revision 01

Page 70

TABLE 24.  HLU-232 LIST 1D STATUS MENU MESSAGES (CONTINUED)

Message

Full Name

Description

HBER

Excessive HDSL
Bit Error Rate

This minor alarm is generated on either the Primary or Protection line unit
whenever the line unit determines that its current BER has exceeded the
minimum BER threshold set by the user.

LOOPBACKS:

SMJK

Smart-Jack
Loopback

Loopback at HRU-412 remote towards network initiated by (2 in 5) in-band
loopback code, or out-of-band ESF data link code (Figure 19).

NREM

Network Remote
Loopback

Loopback at HRU-412 (remote) towards network initiated from CO (network) by
Intelligent Line Repeater (ILR) #2 code, in-band loop code HLU-232 front panel
MANUAL LOOPBACK buttons, HRU-412 front panel button, or maintenance
terminal (Figure 19).

NLOC

Network Local
Loopback

Loopback at HLU-232 List 1D (local) towards network initiated from CO by IOR
code, in-band loop code HLU-232  front panel MANUAL LOOPBACK buttons or
maintenance terminal (Figure 19).

HDU1

Network Doubler 1
Loopback

Loopback at Doubler #1 towards network initiated by IOR code, in-band loop
code, or HLU-232 front panel MANUAL LOOPBACK buttons or maintenance
terminal (Figure 19).

HDU2

Network Doubler 2
Loopback

Loopback at Doubler #2 towards network initiated by IOR code, in-band loop
code, or HLU-232 front panel MANUAL LOOPBACK buttons or maintenance
terminal (Figure 19).

CLOC

Customer Local
Loopback

Loopback at HRU-412 (local) towards CI initiated from CPE by ILR code, in-
band loop code, or HLU-232 front panel MANUAL LOOPBACK buttons or
maintenance terminal (Figure 19).

CREM

Customer Remote
Loopback

Loopback at HLU-232 List 1D (remote) towards customer initiated by IOR code,
in-band loop code, or HLU front panel MANUAL LOOPBACK buttons, or
maintenance terminal (Figure 19).

CDU 1

Customer Doubler
1 Loopback

Loopback at Doubler 1 towards CI initiated by ILR code, HLU-232 front panel
MANUAL LOOPBACK buttons, or maintenance terminal (Figure 19).

CDU 2

Customer Doubler
2 Loopback

Loopback at Doubler 2 towards CI initiated by ILR code, in-band loop code,
HLU-232 front panel MANUAL LOOPBACK buttons, or maintenance terminal
(Figure 19).

TLOS

Transmit Loss of
Signal Loopback

HRU-412 is in a logic loopback state caused by a loss of its T1 input from the
CI, if enabled at the HRU-412 via its TLOS switch option.

Содержание HIGAIN HLU-232




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды