manualshive.com logo in svg

PairGain HIGAIN HLU-232, Руководство пользователя

Поделиться
Скачать
PairGain HIGAIN HLU-232 Скачать руководство пользователя страница 2

Section 150-232-100
Revision 01

Page 2

A. GENERAL

1.  DESCRIPTION AND FEATURES

1.01 PairGain’s HiGain protection switch line unit Model HLU-232, List 1D is the Central Office (CO) side of a
repeaterless T1 transmission system (see Figure 1). The line unit is designed for high reliability applications and is
capable of providing a “hot standby” backup to a second HLU-232 unit (see Figure 2). Otherwise, the HLU-232
operates as a standard HDSL (High-bit-rate Digital Subscriber Line) line unit and retains the operational features of
the HLU-231. When used in conjunction with an HRU-412 HiGain Remote Unit, the system provides 1.544 Mbps
transmission on two unconditioned copper pairs over the full Carrier Serving Area (CSA) range.  The “D” designation
in the list number indicates that this line unit can be used in applications with or without HiGain Doubler Units HDU-
451, HDU-437, or HDU-439. The CSA includes loops up to 12000 feet of AWG 24 or 9000 feet of AWG 26 wire,
including bridged taps. The HiGain system uses HDSL transmission technology as recommended by Bellcore
TA-TSY-001210. The HiGain system complies with TR-TSY-000063 (Network Equipment Building System (NEBS)
Generic Equipment requirements) and TR-TSY-000499 (Transport System Generic Requirements - TSGR) common
requirements.

1.02 HLU-232, List 1D includes:

♦ 

Primary and secondary protection switch applications

♦ 

Selectable DSX-1 Pre-equalizer

♦ 

-130V to -200V self adjusting line voltage for HRU-412 and HDU-451 applications

♦ 

Front Panel HDSL S/N Margin Display

♦ 

Selectable Loopback activation codes

♦ 

RS-232 maintenance port

♦ 

Front-panel user option setup

♦ 

Front Panel DS1 splitting and bridging access jacks

♦ 

Lightning and power cross protection on HDSL interfaces

♦ 

784 kbps full-duplex 2B1Q HDSL transmission on two pairs

♦ 

Front panel status indicating LED

♦ 

Automatic front panel display blanking

♦ 

DS1 LOS detector (125 consecutive zeros)

♦ 

Margin threshold alarm

♦ 

HAIS & SAIS options

♦ 

Easy return to factory default system option settings

♦ 

Circuit ID option.

1.03 HLU-232, List 1D requirements for running as a protection system:

♦ 

HLU-232 List 1D (2 ea)

♦ 

HSA-232 List 1 (1 ea)

♦ 

HRU-412, List 7, or 8 (2 ea)

♦ 

HRE-422 (1 ea)

♦ 

HDU-451, List 4, HDU-437, List 1, or HDU-439, List 1 (optional)

Содержание HIGAIN HLU-232




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды