Painless Performance Products 66501, Руководство по установке

Страница: 32 / 37

32
TCC Solenoid overcurrent error
An over-current condition was detected on the torque converter clutch pressure solenoid.
A short circuit may be present in the solenoid circuit. The controller will attempt to disable
the TCC solenoid until the ignition is turned off.
TCC On/Off Solenoid overcurrent error
An over-current condition was detected on the torque converter clutch solenoid. A short
circuit may be present in the solenoid circuit. The controller will attempt to disable both
TCC solenoids until the ignition is turned off.
TCC PWM Solenoid overcurrent error
An over-current condition was detected on the torque converter clutch pressure solenoid.
A short circuit may be present in the solenoid circuit. The controller will attempt to disable
both TCC solenoids until the ignition is turned off.
EPC (PCS) Solenoid overcurrent error
An over-current condition was detected on the line pressure control solenoid. A short
circuit may be present in the solenoid circuit. The controller will attempt to disable the
solenoid with the over-current condition until the ignition is turned off.
Shift Solenoid A (SSA) undercurrent error
Current measured on the indicated shift solenoid was too low, indicating that the solenoid
circuit may be open.
Shift Solenoid B (SSB) undercurrent error
Current measured on the indicated shift solenoid was too low, indicating that the solenoid
circuit may be open.
3-2 D/S Solenoid undercurrent error
Current measured on the 3-2 downshift solenoid was too low, indicating that the solenoid
circuit may be open.
TCC On/Off Solenoid undercurrent error
Current measured on the torque converter clutch solenoid was too low, indicating that the
solenoid circuit may be open. The controller will attempt to disable both TCC solenoids
until the ignition is turned off.