Painless Performance Products 66501, Руководство по установке

Страница: 23 / 37

23
Speed Sensor = This menu allows you to choose your speed sensor type
and configure its details such as speedometer drive gear teeth, driven gear
teeth, and pulses per revolution. Rotating the knob in this screen changes
the speed sensor type. Available speed sensor types will vary depending on
the current transmission type. If other options, such as speedometer gear
teeth, pulses per revolution etc. are available for a specific sensor type,
pushing the knob will bring up a menu that allows you to change the
adjustment mode or to exit. If no options are available for the selected sensor
type, pressing the knob will exit this screen and save the settings. After
scrolling through all the speed sensor types, the last option is to reset the
speed sensor settings. This will revert all of the settings for the speed sensor,
axle ratio, and tire diameter back to the defaults from the currently loaded
tune.
Axle Ratio
= Allows you to input your axle ratio, which improves speed
display accuracy in the home screen and will also will affect speed sensor
calibration for certain types of speed sensors.
Tire Diam
= Allows you to input your tire diameter, which improves speed
display accuracy in the home screen and will also will affect speed sensor
calibration for certain types of speed sensors.
Engine RPM In
= Allows the adjustment of the engine RPM input
configuration. This includes pulses per revolution and type of RPM sensor or
signal. Turning the knob allows adjustment of pulse rate, while pressing the
knob will bring up a menu of options including preset pulse rates, signal
types, and the exit option (which also saves these settings).