Painless Performance Products 66501, Руководство по установке

Страница: 26 / 37

26
SHIFTWARE SOFTWARE
Introduction
Using the Shiftware software allows you to modify the way your Torc
Transmission Control System behaves. You can customize shift-points as
well as monitor and diagnose the Torc unit in real-time.
Setup
To create a calibration for the Torc module, it is best to start with one of the
standard calibrations which are included with the software. To load a
standard configuration for your transmission, click the
Open button on
the toolbar, left hand side of the screen, then browse to the folder where the
transmission calibration files are located. (Default location is C:\Shiftware\)
The files are named according to the transmission and RPM range and have
the .btc file extension. Choose the calibration file and click
Open .
Once the calibration file is loaded, click the System Settings button on
the toolbar to check the settings and make sure that they are correct for your
transmission. The System Settings window has several tabs within it. Click
each one to see each section of settings specific for your transmission.
The System Settings Window