manualshive.com logo in svg

Pacific Scientific 5170, Инструкция по эксплуатации

Поделиться
Скачать
Pacific Scientific 5170 Скачать руководство пользователя страница 16

 

OPERATING FEATURES 

 

Display. 

Liquid crystal display (LCD). 

 

Auto Zero. 

To select AUTO ZERO operation, press the ZERO pushbutton. Unit automatically returns to normal 

operation. 

 

Manual Zero. 

To select MANUAL ZERO operation, press the SHIFT pushbutton followed by the ZERO 

pushbutton. Use the LEFT (3) and RIGHT (4) arrow pushbuttons to select digit. Use the UP (

5

) and DOWN (

6

) 

arrow pushbuttons to make fine adjustments as needed. Press the RESET pushbutton to clear the offset value. 
Press the SHIFT pushbutton followed by the ZERO pushbutton to return to normal operation. 

 

Auto Relative.* 

To select AUTO RELATIVE operation, press the RELATIVE pushbutton. Unit automatically 

returns to normal operation. AUTO RELATIVE automatically turns the relative offset ON. Push again to turn OFF. 

 

Manual Relative.* 

To select MANUAL RELATIVE operation, press the SHIFT pushbutton followed by the 

RELATIVE pushbutton. Press the LEFT (

3

) arrow pushbutton to turn offset ON. Press the RIGHT (

4

) arrow 

pushbutton to turn offset OFF. Use the LEFT (3) and RIGHT (4) arrow pushbuttons to select digit. Use the UP (

5

) 

and DOWN (

6

) arrow pushbuttons to make fine adjustments as needed. Press the RESET pushbutton to clear 

the offset value. Press the SHIFT pushbutton followed by the RELATIVE pushbutton to return to normal 
operation. 

 

Auto Range. 

To select AUTO RANGE operation, press the SHIFT pushbutton followed by the RANGE 

pushbutton. Press the SHIFT pushbutton followed by the RANGE pushbutton to exit Auto Range mode. 

 

Manual Range. 

To select MANUAL RANGE operation, press the RANGE pushbutton. Press the UP (

5

) and 

DOWN (

6

) arrow pushbuttons to select ranges. Press the RANGE pushbutton to return to normal operation. 

 

Units. 

To select UNITS, press the SHIFT pushbutton followed by the LEFT (

3

) arrow pushbutton. Press the UP 

(

5

) and DOWN (

6

) arrow pushbuttons to select flux density readings in gauss, tesla or ampmeters. Press the 

SHIFT pushbutton followed by the LEFT (

3

) pushbutton to return to normal operation. 

Hold. 

To select the HOLD operation, press the SHIFT pushbutton followed by the RESET pushbutton. Press the 

LEFT (

3

) and RIGHT (

4

) arrow pushbuttons to select between MIN HOLD, MAX HOLD, PEAK HOLD

*

, and 

HOLD 
OFF. In any mode press the RESET pushbutton to clear the held reading. Press the SHIFT pushbutton followed 
by the RESET pushbutton to return to normal operation. 

 

AC/DC. 

To select either AC or DC mode, press the SHIFT pushbutton followed RIGHT (

4

) arrow pushbutton. 

 

Analog Output.*

To enable and disable ANALOG OUTPUT operation, press the SHIFT pushbutton followed by 

the UP (

5

) arrow pushbutton. 

 

ON/OFF. 

Press the ON/OFF pushbutton to power the unit ON. To turn the unit OFF, press the ON/OFF 

pushbutton for 3 seconds. 

 

SLEEP MODE. 

This feature turns unit the OFF after one hour of inactivity (i.e. user input, remote commands 

etc.) 
Press the SHIFT pushbutton followed by the ON/OFF pushbutton to enable and disable this feature. The battery 
symbol and either ON or OFF will flash to indicate the state that has been selected. 

 

FIRMWARE VERSION. 

The firmware versions for the microcontroller and DSP may be displayed by pressing 

RESET for more than 1 second while in any normal operating mode. For example: r2.00 d2.00. 

*

5180 Model only 

Figure 3-3 

Operating Features 

3-2 

Содержание 5170




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды