PaceMaster Platinum ProClub Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 37

background image

30

CARE & MAINTENANCE

The following section describes necessary maintenance for your PaceMaster treadmill. This maintenance is the responsibility of the
purchaser and is not covered under our warranty. Failure to perform this necessary maintenance could result in damage to your treadmill.

CAUTION: Unplug your treadmill before attempting any cleaning or maintenance.

Preventative Maintenance:

The following section outlines the cleaning and preventative maintenance that should be

performed at the recommended intervals

Cleaning your treadmill

•

Use a damp cloth to wipe any perspiration off the console, motor cover, and side rails after each use. The side rails are made of
steel. Occasionally applying a coat of automotive wax to them will help prevent rusting.

•

Every other week, vacuum around and underneath the treadmill.

Deck and Tread Belt Cleaning

The running belt on your PaceMaster rides on a low friction deck. Performance will be compromised if any foreign matter comes between

the tread belt and the deck. For this reason, extra care must be used in keeping the tread belt clean. Use a soft, damp cloth to remove

dust, dirt and foreign matter from the area along side of the belt. Do not clean the tread belt by turning on the treadmill.

Recommended Deck & Belt Lubrication

PaceMaster treadmills are manufactured with a low maintenance, pre-lubricated running belt. No lubrication is required for the first 4 - 9

months (see chart below) in residential use. The deck & belt on all treadmills are wear items, and to maximize performance and longevity

we recommend following the preventative maintenance deck & belt lubrication schedule below. Use the PaceMaster lubrication kit that
was supplied with your treadmill.

PaceMaster Light Commercial Tread Belt Lubrication Schedule

1

st

Lubrication

Next Lubrication

4 months

Every 3 months

«
...
28
29
30
31
32
...
»

Содержание Platinum ProClub






































Отзывы:

Нет отзывов

Похожие инструкции для Platinum ProClub

Бренд: Master Страницы: 80

Бренд: Deltech Fitness Страницы: 8

Elite 12.5 NTEVEL13014.0

Бренд: NordicTrack Страницы: 32

Бренд: CrossToner Страницы: 16

ARTEMIS III DELUXE AIR ROWER

Бренд: V-fit Страницы: 28

Бренд: DnaNudge Страницы: 2

Бренд: AccuMed Страницы: 15

Бренд: Hang ups Teeter Страницы: 19

Бренд: actiiv Страницы: 2

Бренд: Novation Страницы: 55

Бренд: Mad Catz Страницы: 35

Бренд: Gold's Gym Страницы: 4

Бренд: Gold's Gym Страницы: 4

Platinum GGBE2558.0

Бренд: Gold's Gym Страницы: 20

Бренд: Gold's Gym Страницы: 20

Interactive 890

Бренд: Gold's Gym Страницы: 36

Бренд: BOSU Страницы: 4

Бренд: DELTA-SPORT Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды