Paccar MX-11 Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 121

background image

cracks in the tubing and elbows. Leaks in
the intake system allow abrasive dust to
enter the engine and quickly cause
expensive damage. During your daily walk-
around inspection, carefully check all
tubing, elbows, clamps, supports, and
fasteners for condition and tightness.
Check the charge-air-cooler for air leaks
annually. The air leaks can be caused by
cracked tubes or header. For service see
your authorized dealer.

CAUTION

DO NOT use air intake pipes and con-
nections as a step or to pull yourself
up. This could loosen the connections
and open the system to unfiltered air
which could damage the engine.

Air Compressor

Perform these maintenance procedures
according to the Preventative Maintenance
Schedule.

1.

Check and correct for carbon
buildup

Charge Air Piping

Perform these maintenance procedures
according to the Preventative Maintenance
Schedule.

1.

Check and correct the following
charge air piping components:

•

Hose/pipe condition –
deterioration/signs of leaking

•

Hose clamps for tightness

•

Clearance to other components

Charge Air Cooler

Perform these maintenance procedures
according to the Preventative Maintenance
Schedule.

1.

Check and correct the following
components of the charge air
cooler:

•

Cracked tubes or header

•

Clogged fins/tubes

•

Hose/pipe condition –
deterioration/signs of leaking

•

Hose clamp torque

Engine Air Filters

The following service information is basic
to all engine air filter makes and models.

WARNING

DO NOT use air filter housings as grab
handles. These components may
break if you are using them to support
your weight. Failure to comply may re-
sult in personal injury or damage to ve-
hicle components.

WARNING

DO  NOT  push  on  the  under  hood  air
door  with  hands.  This  door  is  held
closed  with  a  spring  which  may  shut
close  unexpectedly.  Failure  to  comply
may result in personal injury.

CAUTION

Failure to replace air filter at proper in-
tervals  may  result  in  passage  of  dirt/
debris  into  the  engine  or  the  “dusting”
of  an  engine  resulting  in  significant
equipment damage.

Your vehicle is equipped with an air inlet
restriction indicator as standard equipment

ENGINE MAINTENANCE - Maintenance Procedures

Y53-1166-1M1 (10/2020)

93

2

«
...
93
94
95
96
97
...
»

Содержание MX-11


























































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-11

Бренд: KTM Страницы: 92

Бренд: Volvo Penta Страницы: 41

Gasoline V6 90 Degree

Бренд: GMC Страницы: 94

Бренд: Texas Equipment Страницы: 38

TWINMOT T2-PLUS H

Бренд: Germany Motions Страницы: 12

BEVELMASTER 204B

Бренд: TRI tool Страницы: 46

Бренд: LONCIN Страницы: 44

Бренд: Gaspar Страницы: 53

Бренд: Kyosho Страницы: 4

Бренд: Cree Страницы: 2

Бренд: SKY Engines Страницы: 26

Бренд: Mitsubishi Страницы: 155

Бренд: Radient RC Страницы: 8

Бренд: Nanni Страницы: 64

Бренд: Tank Страницы: 182

Xicoy X45Helicopter

Бренд: Gaspar Страницы: 53

AlphaStep AR Series

Бренд: Oriental motor Страницы: 8

BAMOCAR-D3-700-100

Бренд: Unitek Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды