Paccar MX-11 Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 121

background image

Cooling System

Your engine may be equipped with a
coolant filter designed to capture and
remove harmful deposits from the cooling
system to help prolong system life. Refer to
the Preventative Maintenance Schedule for
the recommended coolant filter change
service interval.

WARNING

Do  not  remove  the  surge  tank  fill  cap
on a hot engine. It can cause scalding
coolant to spray out and you could be
burned. If the engine has been operat-
ed  within  the  last  30  minutes,  be  very
careful  in  removing  the  radiator  cap.
Protect face, hands, and arms against
escaping  fluid  and  steam  by  covering
the cap with a large, thick rag. Failure
to comply may result in death, person-
al  injury,  equipment  or  property  dam-
age

WARNING

Handle coolant and antifreeze careful-
ly. Ethylene glycol antifreeze is poison-

ous.  Store  in  original  fluid  container
only, and always keep out of the reach
of children. Never remove the filler cap
(vertically mounted) on the surge tank
while  the  engine  is  still  hot.  Wait  until
the  coolant  temperature  is  below
120°F (50°C). Scalding steam and flu-
id  under  pressure  may  escape  and
cause  serious  personal  injuries.  The
pressure  cap  (horizontally  mounted)
on  the  surge  tank  should  never  be
opened.  Failure  to  comply  may  result
in death, personal injury, equipment or
property damage.

Coolant/Antifreeze Condition

Perform these maintenance procedures
according to the Preventative Maintenance
Schedule.

NOTE

Test  the  engine  coolant  at  least  twice
per  year  to  determine  if  the  coolant
must  be  replaced.  If  it  is  determined
that  the  coolant  should  be  replaced,
make sure to flush the coolant system.
Contact  a  PACCAR®  Authorized  Re-

pair Location for flushing the coolant
system.

1.

Check the following anti-freeze
conditions:

•

Coolant level

•

Freeze point

•

pH level

•

Nitrite level

•

Carboxylate level

Checking Coolant Condition

To ensure the Extended Life Coolant (ELC)
in your vehicle always provides maximum
protection, perform the following tests:

1.

Check the coolant color at every
maintenance interval. It
should have no cloudiness, floating
debris, or oils.

2.

Test the freeze point at least twice
a year. A refractometer or test
strips can be used to measure the
protection level.

3.

Determine the pH and chemical
inhibitor concentration level by
using an ELC-specific test kit or
test strips.

4.

Keep the cooling system full by
topping-up using ELC pre-diluted to

ENGINE MAINTENANCE - Maintenance Procedures

Y53-1166-1M1 (10/2020)

83

2

«
...
83
84
85
86
87
...
»

Содержание MX-11


























































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-11

Бренд: VAR-SPE Страницы: 80

Бренд: Ibiza Страницы: 3

Бренд: Aerotech Страницы: 59

Бренд: Schweigen Страницы: 28

Бренд: Engine distributors Страницы: 331

Torqmotor TF Series

Бренд: Parker Страницы: 44

Бренд: Pacific Страницы: 48

Бренд: Sesame Motor Страницы: 4

Бренд: Mafell Страницы: 206

MotorLift RA20F

Бренд: Chamberlain Страницы: 24

Бренд: Chamberlain Страницы: 40

Enduro RR 250 2016

Бренд: Beta Страницы: 110

Enduro RR 350 2013

Бренд: Beta Страницы: 134

Бренд: YS Страницы: 2

Бренд: Haas Страницы: 7

Бренд: Detroit Diesel Страницы: 135

Бренд: Yanmar Страницы: 76

Бренд: Yanmar Страницы: 234

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды