manualshive.com logo in svg

Paccar MX-11, Руководство оператора, Страница: 63 / 121

Поделиться
Скачать
Paccar MX-11 Скачать руководство пользователя страница 63

NOTE

Maximum recommended ELC concen-
tration is 60% ELC and 40% water by
volume (a 60/40 coolant mixture). The
minimum  recommended  concentration
is 40%.

Glycol Concentration Level

Level

Desired
Coolant

/ Water

Ratio

Freeze

Point °F

(°C)

Recommended
Levels

40%

-12 (-24)

45%

-23 (-31)

50%

-34 (-37)

55%

-50 (-46)

60%

-62 (-52)

Condition

Perform a visual inspection of the coolant.
It should have no cloudiness or floating
debris. Determine the chemical inhibitor
concentration level by using an extended
life coolant specific test kit or test strips.
Inhibitor concentration level determines
corrosion protection. If you are concerned
about possible coolant quality,
contamination, or mechanical problems,
submit a coolant sample for analysis.
Improper maintenance may cause coolant
degradation and could result in damage to
the cooling system and engine
components. Consult your dealer or
the coolant manufacturer’s representative
for recommended extended life coolant test
kits, test strips, and laboratory sample
procedures.

Coolant Extender

Add extended life coolant extender, if
necessary, according to the corrosion
inhibitor concentration required. DO NOT
add coolant extender to nitrite-free coolant.

Checking Coolant Level

Check the coolant level daily. See 

Coolant

Level

 on page 33.

CAUTION

When adding coolant, avoid mixing dif-
ferent  brands  and  formulations.  If  the
coolant  is  mixed  with  more  than  25%
of a different formulation (for example,
mixing  OAT  and  NOAT  coolants),  en-
gine  corrosion  damage  could  occur.  If
mixing  exceeds  25%  of  total  system
volume,  it  is  recommended  to  flush
and  refill  the  system  completely  with
one type of coolant.

Coolant Filter

Your engine is equipped with a coolant
filter designed to capture and remove
harmful deposits from the cooling system
to help prolong system life. It is a "blank
filter" and does not contain chemicals or
time-release additives. Replace it only with
a blank filter at the interval specified in the
Preventative Maintenance Schedule.
NEVER use filters that contain
supplemental coolant additives (SCAs) in
an ELC-filled system.

ENGINE MAINTENANCE - Cooling System Maintenance

Y53-1166-1M1 (10/2020)

61

2

Содержание MX-11


























































































































Отзывы:

Нет отзывов