Paccar MX-11 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 121

background image

Maintenance
Requirements

Engine Maintenance

PACCAR recommends that the engine be
maintained according to the maintenance
schedule in this section.
If the engine is operating in ambient
temperatures below 0°F (-18°C) or above
100°F (38°C), perform maintenance at
shorter intervals. Shorter maintenance
intervals are also required if the engine is
operated in a dusty environment or if
frequent stops are made.
Some of these maintenance procedures
require special tools or must be completed
by qualified personnel. Contact your local
PACCAR authorized repair location for
detailed information.
If your engine is equipped with a
component or accessory not manufactured
by PACCAR Inc, refer to the component
manufacturer's maintenance
recommendations.

WARNING

Never  idle  your  vehicle  for  prolonged
periods  of  time  if  you  sense  that  ex-
haust  fumes  are  entering  the  cab.  In-
vestigate  the  cause  of  the  fumes  and
correct  it  as  soon  as  possible.  If  the
vehicle  must  be  driven  under  these
conditions, drive only with the windows
open.  Failure  to  repair  the  source  of
the exhaust fumes may result in death,
personal  injury,  equipment  or  property
damage.

WARNING

Exhaust  fumes  from  the  engine  con-
tain carbon monoxide, a colorless and
odorless gas. DO NOT breathe the en-
gine exhaust gas. A poorly maintained,
damaged  or  corroded  exhaust  system
can  allow  carbon  monoxide  to  enter
the cab. Entry of carbon monoxide into
the cab is also possible from other ve-
hicles nearby. Failure to properly main-
tain  your  vehicle  could  cause  carbon
monoxide to enter the cab, resulting in
death or personal injury.

Cleaning the Engine

You must clean the undercarriage, engine
compartment, and engine as needed, but
at least annually. Cleaning removes road
salt and debris that can be corrosive or
otherwise harmful to the electrical system.
Failure to properly clean the undercarriage
of the truck can increase the risk of an
electrical fire. When cleaning the engine,
follow the instructions from the vehicle
manufacturer's operator's manual and
observe all environmental protection
regulations.

CAUTION

Do not direct high pressure water onto
electrical  components,  plug  connec-
tors, seals or flexible hoses on the en-
gine. Failure to comply can accelerate
corrosion  and  degrade  electrical  com-
ponent  which  may  cause  a  fire  or
equipment damage.

ENGINE MAINTENANCE - Maintenance Requirements

32

Y53-1166-1M1 (10/2020)

2

«
...
32
33
34
35
36
...
»

Содержание MX-11


























































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-11

E-8 DIESEL ENGINE

Бренд: M.T.H. Страницы: 36

Бренд: Shindaiwa Страницы: 44

Бренд: Polini Страницы: 34

Бренд: Man Страницы: 18

Бренд: KONTRONIK Страницы: 6

Бренд: Yamaha Страницы: 2

Бренд: Yamaha Страницы: 90

Бренд: Yamaha Страницы: 110

Бренд: Yamaha Страницы: 110

Бренд: Yamaha Страницы: 232

Бренд: Yamaha Страницы: 305

Бренд: Yamaha Страницы: 307

Бренд: Yamaha Страницы: 372

Бренд: Yamaha Страницы: 444

Бренд: Caple Страницы: 20

Бренд: Caple Страницы: 24

Бренд: Winterthur Gas Страницы: 495

Бренд: Chicago Pneumatic Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды