Paccar MX-11 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 121

Paccar MX-11 Скачать руководство пользователя страница 62

recommends only using a 50/50 mixture of
distilled water and ELC when cooling
system service is required. A 50/50 mixture
of ELC and distilled water will provide
freeze protection down to -34°F (-36.7°C),
which is adequate for most locations in
North America. For extremely cold
operating conditions, a 60/40 mixture
(coolant/water ratio) can be used to
provide freeze protection down to -62°F
(-52.2°C).
Unless otherwise optioned, factory fill
coolant is an ethylene glycol, nitrited
organic acid technology (NOAT) extended
life coolant (ELC) formulation at a 50:50
coolant-to-distilled water mixture. The
factory fill exceeds ASTM D6210 and
Caterpillar EC-1 requirements. Maintaining
coolant chemistry and freeze protection is
critical to engine and cooling system
component health and longevity.

WARNING

Coolant is toxic. DO NOT get the fluid
in  eyes.  If  contact  occurs,  flood  eyes
with large amounts of water for 15 mi-
nutes.  Avoid  prolonged  or  repeated
contact  with  skin.  In  case  of  contact,
immediately  wash  skin  with  soap  and

water. DO NOT take internally. If swal-
lowed, seek immediate medical atten-
tion. DO NOT induce vomiting. Failure
to comply may result in death, person-
al injury, equipment or property dam-
age.

CAUTION

The  engine  cooling  system  has  very
specific  maintenance  and  inspection
requirements. Failure to follow require-
ments can damage the engine. Engine
damage  can  include  but  is  not  limited
to  freezing,  boiling,  corrosion,  pitted
cylinder  liners.  This  information  is
found  in  the  engine  manufacturers
owner’s  manual.  It  is  the  owner’s  re-
sponsibility  to  follow  all  requirements
listed  in  the  engine  manufacturers
owner’s manual.

NOTE

Coolant is harmful to the environment.
Unused  coolant  must  be  stored  as  a
toxic  hazardous  material  in  leakproof
containers.  Used  coolant  must  be

processed as industrial chemical
waste. Please follow HAZMAT guide-
lines with both used and unused cool-
ants.

CAUTION

Use of non-genuine PACCAR coolant
filters may cause severe engine dam-
age.

Concentration

Check the level of freeze/boil over
protection, which is determined by the
glycol concentration. Use a glycol
refractometer to determine glycol level.
Add coolant to obtain the coolant/water
ratio required to provide the protection you
need. A 50/50 mix of coolant and water is
adequate for most applications. For
extremely cold operating conditions, the
ratio can be adjusted to a higher
concentration of coolant.

ENGINE MAINTENANCE - Cooling System Maintenance

60

Y53-1166-1M1 (10/2020)

2

«
...
60
61
62
63
64
...
»

Содержание MX-11


























































































































Отзывы:

Нет отзывов