44
SRM Setup Mode |
Copyright © P Squared Ltd 2013
4.
Once you are happy that you are on ‘page’ 1 for the settings, you can move on to selecting
the mode that you want to set for the Microphone / Line channel.
The available modes for the Mic / Line channels are:
Mode 1 -
Mic & Line available for selection (default)
- Phantom power off
Mode 2 -
Mic (phantom 48v) & Line available for selection –
Phantom power on
Mode 3 -
Mic only
– Phantom power off
Mode 4 -
Mic (phantom 48v) only –
Phantom power on
Mode 5 -
Line only –
Phantom power not applicable
To select the mode you require, press the Mic/Line button at the top of the channel to
toggle between the available modes.
The selected mode will be represented by the button flashing the corresponding amount of
times, pausing and then repeating the flash pattern.
So if you wanted to have the channel set to allow selecting between Mic and Line inputs
with the channel also providing phantom power then you would need to select ‘mode 2’.
Simply press the Mic/Line button until the light flashes twice, pauses and then flashes twice
again. The channel is now in ‘mode 2’ and phantom power will be supplied when the
channel is switched to microphone mode.