SRM Operations Manual
35
Using The Telephone Interface |
Copyright © P Squared Ltd 2013
5.
The call is now being routed via the SRM mixer and talkback to the caller is enabled via the
microphone connected to Microphone Channel 1. With your headphones on and by talking
into the microphone connected to Microphone Channel 1 you should be able to hear your
caller and they should be able to hear you.
You can safely replace the handset receiver at this stage but you should leave the handset
off the phone cradle if you wish to talk to the caller at the end of broadcast session.
Please note that you can use the TRIM knob on the TEL/AUX channel if you need to turn the
caller’s volume up at all.
Caution:
As soon as you have pressed the Pre-Fade & TB button and the Line Hold button,
the caller will be able to hear you so watch what you say!
6.
When you are ready to put the caller to ‘air’ simply raise the fader on the TEL / AUX channel
to the top.
