10
MAN 9061505 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Maintenance and storage
To ensure that the machine performs satisfactorily, the correct maintenance must be
carried out. Regular maintenance will ensure unnecessary wear will be avoided and all
parts function correctly.
Follow all of the instructions for the maintenance and adjustment intervals for the
machine.
It is advised that you document the machine’s operating hours and the conditions
under which the machine operated.
⚠
The engine must always be switched off and the spark plug cap and spark
plug lead disconnected before any maintenance tasks are carried out!
Maintenance schedule
Task
During the season
After the season
Check of engine oil
Before each use
Replace the engine oil after 5 operating
hours and again after 50 operating hours.
Replace the
engine oil.
Check air filter.
Before each use
Clean after 25 hours of use.
Replace the air
filter.
Spark plug
Replace
Inspect the blades and
blade holders
Before each use*
Inspection
Silencer and any spark
arrester
Clean after 8 hours of use
Check the gliding plate
and cutting disc’s fitting
on the shaft.
Before each use*
Inspection
Inspect the top and
bottom disc to see
whether they are intact.
Before each use*
Inspection
Check the drive belt’s
tension
As required
Inspection
Checking the state of the
drive belt
As required
Inspection**
Cleaning of the wheel
hub and replacement of
lubricant
_
X
Remove any dirt and dirt
from the machine.
After each use
X
*In case of damage – cracks, dents, bends etc., the machine must be repaired immediately!
** Replace after 100 hours of operation.