Ozito X PXC PXGMTK-4182, Инструкция по эксплуатации

Страница: 25 / 40

Pruning
Pruning is the removal of a limb or branch from a standing
tree.
Limbing
Limbing is the process of removing the branches from
a fallen tree. Check the direction in which a branch will
bend before cutting it. Always cut on the opposite side to
the bending direction so that the guide bar is not pinched
in the cut. For large limbs that cannot be removed in one
cut, make an initial cut from the bent side and finish by
sawing from the opposite direction. Do not remove limbs
that are supporting the fallen tree on the ground until the
tree has been cut into lengths.
WARNING! ENSURE APPROPRIATE CARE IS TAKEN WHEN CUTTING
ABOVE SHOULDER HEIGHT.
WARNING! THE CHAIN COMES IN CONTACT WITH A HARD OBJECT,
VISUALLY INSPECT THE CHAIN & BAR FOR DAMAGE. IF THE CHAIN OR
BAR IS DAMAGED, DO NOT CONTINUE TO OPERATE THE POLE PRUNER.
WARNING! NEVER USE THE POLE PRUNER WHEN STANDING ON A
LADDER OR UNEVEN GROUND. DO NOT OVERREACH. ALWAYS USE BOTH
HANDS TO HOLD THE POLE PRUNER.
1
2
1
2
25